Xylem SDI-12 Data Logger iRIS 220, iRIS 320, iRIS 350, iRIS 150, iRIS 300 - Manual (Page 94)

iRIS Datalogger User Guide V1.50
88 iQuest (NZ) Ltd - PO Box 15169, Hamilton, New Zealand Tel: +64 7 857-0810 Fax: +64 7 857-0811 Email: [email protected]
15.3 Mounting
This can be achieved with the use of the four M6 Allen Key® bolts or other suitable hardware such as wood
screws. The diagram below shows the overall dimensions and position of the mounting holes for the IRIS-
CAM. The correct orientation is shown in the diagram, where the engraved writing is the right way up. The
cable extends from the left side of the enclosure when viewing the camera from the front.
Due to the lens’s small aperture it can be susceptible to image quality degradation due to droplet of water
(which creates a second lens). To minimize the effects, provide the camera lens with a rain shield; position
the camera so that it points down and away from prevailing weather.