beautypg.com

Xylem SDI-12 Data Logger iRIS 220, iRIS 320, iRIS 350, iRIS 150, iRIS 300 User Manual

Page 27

background image

21

iQuest (NZ) Ltd - PO Box 15169, Hamilton, New Zealand Tel: +64 7 857-0810 Fax: +64 7 857-0811 Email: [email protected]


When using transparent terminal mode you must press the key after each command or message
you wish to send. Press ESC then Enter to exit the modem terminal session and return to the communication
menu.

Option 9

The SDI-12 terminal mode allows direct access to instruments connected to the SDI-12 interface. This is
useful when a manual check or changes need to be made, such as address changes, scale factors etc.
Knowledge of SDI-12 commands is required to make best use of this feature.

> SDI-12 Terminal mode active. Press to exit


This menu option will only appear if one or more sensors have a source set to 15 (SDI-12).