Xylem SDI-12 Data Logger iRIS 220, iRIS 320, iRIS 350, iRIS 150, iRIS 300 - Manual (Page 52)

iRIS Datalogger User Guide V1.50
46 iQuest (NZ) Ltd - PO Box 15169, Hamilton, New Zealand Tel: +64 7 857-0810 Fax: +64 7 857-0811 Email: [email protected]
Comms Setting Screen 5/8 - Schedule 1 (Level 5)
This screen displays the time range during which the unit is allowed to make a connection to the wireless
network. Refer to the Communications Schedule (Section 4.4.3) for details on how these settings affect the
communication availability.
Comms Setting Screen 6/8 - Schedule 2 (Level 5)
This screen displays the duration that the unit will stay connected to the wireless network and the frequency
at which connections will be made during the allowable time range. Refer to the Comms Schedule (Section
4.4.3) for details on these settings affect the communication availability.
Comms Setting Screen 7/8– CSD Settings (Level 5)
This screen displays the primary and secondary phone numbers for the iRIS to use when it initiates a call-in
(CSD call-back mode) or send a SMS text message (SMS call-back mode).
Comms Setting Screen 8/8 – RS232 Settings (Level 5)
This screen displays the RS232 port status and mode. The port can be in one of two states, “Normal” or
“User”.
Normal: is the default setting and this is the mode that needs to be selected if a terminal session is to be
established with the iRIS.
User: If the application program has the appropriate serial driver code included (a user script), then the
RS232 port can be used to communicate with an external device such as an intelligent sensor. In this
situation, the user script will typically store the retrieved values in reserved database locations for access by
the virtual sensors set to source type 12. See Section 4.4.8 for details on sensor sources.
When the RS232 port is set to User mode, the name of the user script (if installed) is displayed
on the LCD as well.
GPRS 5/8
SCHEDULE
Start 0030
End 2359
GPRS 6/8
SCHEDULE
Duration 120sec
Freq 60min
+/- Move forwards/backwards through communication setting screens.
Alt Enter Move up to Comms Status screen
+/- Move forwards/backwards through communication setting screens.
Alt Enter Move up to Comms Status screen
CSD/SMS 7/8
Phone List:
+6478570810
+6478570811
+/- Move forwards/backwards through communication setting screens.
Alt Enter Move up to Comms Status screen
RS232 8/8
Port Mode is
NORMAL
Enter to chg
+/- Move forwards/backwards through communication setting screens.
Enter Move to RS232 Mode screen
Alt Enter Move up to Comms Status screen