Xylem SDI-12 Data Logger iRIS 220, iRIS 320, iRIS 350, iRIS 150, iRIS 300 - Manual (Page 28)

iRIS Datalogger User Guide V1.50
22 iQuest (NZ) Ltd - PO Box 15169, Hamilton, New Zealand Tel: +64 7 857-0810 Fax: +64 7 857-0811 Email: [email protected]
4.4.4 GPRS / 3G / CDMA-1X Cfg (Level 3)
The GPRS/3G/CDMA-1X set-up menu configures the specific wireless IP connection settings.
* GPRS Cfg
0 Exit
1 APN [iquest.co.nz] (for GPRS/3G) - Reserved – (for CDMA)
2 LogIn [,]
3 SIM PIN [0]
4 Socket A [192.168.1.10,7778]
5 Socket B [192.168.1.10,7777]
6 IP Acceptance
7 Schedule
8 GSM Module Info
>
Option 0
Select this option to return to the Comms Cfg menu.
Option 1
When this option is selected you will be prompted to enter a GPRS or 3G APN (Access Point Name). This
option is not applicable for CDMA - the menu entry will be – Reserved - and this choice will be
ignored.
> APN=
Enter the name of the APN allocated by your network provider (e.g. iquest.co.nz).
Option 2
This option is where the network login parameters (user name and password) are configured. When this
option is selected you will be prompted firstly to enter a user name, then a password. Many providers do not
require any login credentials, in which case these parameters should be set to empty. Press Esc then
Enter to enter an empty string.
> User Name=
Enter the user name required by your wireless network provider.
> Password=
Enter the password required by your wireless network provider.
Option 3
When the SIM card installed has a PIN code enabled for security purposes, use this option to define it. If a
PIN code is not required, enter zero (0) for this setting.
If a SIM PIN is required and an incorrect PIN is entered, the unit will not operate correctly. For
CDMA-1X units, this parameter is ignored.
Also, if the SIM PIN is set incorrectly on a GPRS unit, repeated attempts by the iRIS to log-on
may result in the SIM card becoming locked out. This situation will require knowledge of the
SIM’s PIN Unlock Key (PUK) and/or contacting the SIM provider for unlock details.