Xylem IM167 R8 Aquavar CPC (Centrifugal Pump Control) - Manual (Page 69)

69
Defaults
Group
Fault Range Description Single Synch- Multi- Constant Speed
24 Functions Pump ronous Control Slave Control
2409 Comm Fault Selects how the drive reacts in a Last Last Last Last Last
Function fieldbus comm break i.e.; if the Speed Speed Speed Speed Speed
drive fails to receive command
word or reference. The time de-
lays is given by parameter 2410.
Not Selected No response
Fault Drive Faults and coasts to stop
Last Speed Drive displays a warning and
remains running at last speed
reference.
2410 Comm Fault 0…60.0s Defines the time delay for the 3.0 s 3 3 3 3
Time control word or reference
supervision.
Group Automatic
Range Description
Single Synch- Multi- Constant Speed
25 Reset Pump ronous Control Slave Control
2501 NR of Trials 0…5 Sets the number of allowed 0 0 0 0 0
automatic resets within a trial
period defined by parameter
2502.
2502 Trial Time 1.0…600.0 s Sets the time limit used for 30 s 30 s 30 s 30 s 30 s
counting and limiting the
number of resets.
2503 Delay Time 0.0…120.0 s Sets the delay between fault 0 s 0 s 0 s 0 s 0 s
detection and attempted drive
restart.
2504 AR Overcurrent Auto reset after overcurrent Enabled Enabled Enabled Enabled Enabled
Disable fault.
2505 AR Overvoltage Auto reset of overvoltage Enabled Enabled Enabled Enabled Enabled
Disable fault.
2506 AR Undervoltage Auto reset for undervoltage Enabled Enabled Enabled Enabled Enabled
Disable of drive.
2507 AR AI Auto reset after transducer Enabled Enabled Enabled Enabled Enabled
Disable signal loss.
Group Energy
Range Description
Single Synch- Multi- Constant Speed
26 Savings Pump ronous Control Slave Control
2601 Energy Cost 0.000…1.000 Cost of energy in USD
2602 Baseline Power 0…1000 hp Baseline HP for a conventional
fixed speed system.
2603 Savings Scale 0…65535 This parameter scales the 10000 10000 10000 10000 10000
analog output when energy
savings is selected.
2604 Energy Save Savings Savings Savings Savings Savings
Methd Savings Op 1 Op 1 Op 1 Op 1 Op 1 Op 1
Savings Op 2
PARAMETER LISTINGS