Xylem IM167 R8 Aquavar CPC (Centrifugal Pump Control) - Manual (Page 54)

54
Defaults
Group Status Words
Range Description
Single Synch- Multi- Constant Speed
03 Pump ronous Control Slave Control
0310 AV Alarm Word — Aquavar Alarm word
0311 AV Fault Word — Aquavar Fault word
0312 Comm RO Word —
0313 Comm Value 1 —
0314 Comm Value 2 —
Group Locks/
Range Description
Single Synch- Multi- Constant Speed
10 Passwords Pump ronous Control Slave Control
1001 Parameter Lock Selects the state of the parameter Locked Locked Locked Locked Locked
lock. The lock prevents
parameters from being changed.
Open The lock is open. Parameter
values can be changed.
Locked Parameter values cannot be
(Default) changed from the keypad. The
lock can be opened by entering
the valid password in parameter
10.02. When the keypad is
locked the AV keypad function-
ality is limited to starting,
stopping and changing the
reference (set point).
1002 Pass Code 0…300000 Password setting 66 opens the 0 0 0 0 0
lock and returns the value to
zero on the display. The pass-
word relocks when power is
disconnected. To relock the
keypad reset parameter 1001
to “Locked”.
1003 Local Lock Disables local control on the Off Off Off Off Off
keypad. WARNING! Before
activating, ensure that the
control panel is not needed for
stopping the drive.
Off (Default) Local control allowed.
On Local control disabled.
1004 Parameter Save Saves the parameter values to Done Done Done Done Done
the permanent memory.
Done (Default) Parameters entered via the
keypad are automatically saved.
Parameters are not automatically
saved when altered through the
fieldbus connection.
PARAMETER LISTINGS