GE Industrial Solutions Entellisys 4.0 System User Manual - Manual (Page 213)

Sequence of events cause code cross reference index 213
A
A Alarms and events
A.1 Sequence of events cause code cross reference index
The following table lists the sequence of events cause codes. To view a description of these
events and a troubleshooting guide, see
Alarms and events description and system
troubleshooting guide on page 240 .
Table A-1 Sequence of events cause code cross reference index
Cause Event Text Category Page
H-0001 HMI Startup Others page 240
H-0002 HMI Shutdown Others page 240
H-0003 HMI Resumed Communication with [CPUA/B] Others page 241
H-0004 Caution: HMI Lost Communication with [CPUA/B] Caution page 241
H-0005 Caution: HMI couldn't Establish Communication with [CPUA/B] Caution page 241
H-0006 Default CPU set to CPUA Others page 244
H-0007 Default CPU set to CPUB Others page 245
H-0008 Messnger Commission Command Sent for Breaker [Name] Others page 245
H-0009 Messnger Decommission Command Sent for Breaker [Name] Others page 245‘
H-000A IP Address for CPUA Set To [n.n.n.n] From [n.n.n.n] Others page 241
H-000B IP Address for CPUB Set To [n.n.n.n] From [n.n.n.n] Others page 242
H-000C Frequency Set To [50/60]Hz for [CPUA/B] Others page 245
H-000D Caution: Settings Failed Writing Frequency to [CPUA/B] Caution page 245
H-000E Caution: Settings Failed Writing Commission Status To [CPUA/B] Others page 245
H-0015 HMI System Date & Time set Successfully to Time Server Others page 244
H-0016 Setting HMI System Date & Time to Time Server Failed Others page 244
H-0018 Caution: Firmware Download Failed for [CPU A/B/Messngr].Unable to Enable Flash Pgm Mode.
Replace CPU. Caution page 242
H-001C Caution: Firmware Download Failed for [CPU A/B/Messngr].Cannot Erase Firmware.Replace
CPU. Caution page 242
H-001D Firmware Downloaded OK To [CPU A/B/Messngr] Others page 242
H-001E Firmware Download Failed For CPU[A/B/MESSNGR] Others page 242