B&B Electronics ADAM-5000_TCP - Manual - Manual (Page 65)

Chapter 5 System Hardware Configuration
5-3-10 Data Stream
Data Stream Configuration In addition to TCP/IP communication
protocol, ADAM-5000/TCP Series sup- ports UDP communication
protocol to regularly broadcast data to spe- cific host PCs. Click the tip
of Data stream, then configure the broadcasting interval and the specific
IPs which need to receive data from the specific ADAM-
5000/TCP Series. This UDP Data Stream function broadcasts up to 8
host PCs simultaneously, and the interval is user-defined from 50ms to 7
Days.
Figure 5-24: Data Stream Configuration
Data Stream Monitoring
After finishing the configuration of Data Stream, you can select the item
“Monitor Data Stream” in the function bar or click icon to call up opera-
tion display as Figure 5-25.
5-20 ADAM-5000/TCP User’s Manual