B&B Electronics ADAM-5000_TCP - Manual - Manual (Page 6)

Organization of this manual This Manual has six chapters, three
appendices. The following table lists each chapter or appendices with its
corresponding title and a brief overview of the topics covered in it.
Chapter /
Appendix
Title Topics Covered
Introduces the suitable applying industries
and the position in a SCADA system.
Summarize the features and the specification
of ADAM-5000/TCP. Explains the functions of
the LED indicators. 1 Understanding Your System
Provides a briefly selection chart and
specification table of ADAM-5000 I/O
modules for users to organize their system
easily. Give a direction to calculate system
capacity and select a certain power supply.
Recommend a standard for communication
cable and connector.
2 Selecting Your Hardware
Lists the necessary components and proper
environment in installing process. Describes
the Hardware dimension and the way to place
or mount it. Explains the rule of mapping I/O
address. Describes the wiring and connecting
detail for ADAM-5000/TCP.
3 Hardware Installation Guide
Introduces the detail specifications functions
and application wiring of each ADAM-5000 4 I/O Module Introduction
I/O modules.
Guides users to use Windows Utility for
network & security setting, I/O range
configuration, accuracy calibration, command
setting, and so on.
5 System Configuration Guide
Introduces the functions and structure of DLL
drivers and command sets. Explain how to
integrate these programming tools to plan your
application program.
6
Planning Your Application
Program
Provides organized worksheets for users to
establish system configuration document in
order.
A Design Worksheets
B Data Formats and I/O Range
Provides detail information about Data
formats and I/O Range of Analog Module.
C Grounding Reference
Explains the concepts about field grounding
and shielding.