B&B Electronics ADAM-5000_TCP - Manual - Manual (Page 130)

Planning Your Application Program
ADAM-5017/5018 Analog Input Command Set
Chapter 6
Command Syntax Command Name Description
$aaSiArrff Configuration Sets slot index, input range, data
format and integration time for a
specified analog input module in a
specified system.
$aaSiB Configuration Status Returns the configuration
parameters for a specified
analog input module of a
specified system.
$aaSi5mm Enable/Disable
Channels for
multiplexing
Enables/Disables multiplexing
for separate channels of the
specified input module
$aaSi6 Read Channels Status Asks a specified input module
to return the status of all
channels
#aaSi All Analog Data In Returns the input value of all
channels for a specified analog
input module of a specified
system in engineering units only.
#aaSiCj Specified Analog
Data In
$aaSiER Initialize EEPROM
Data
Returns the input value of a
specified channel for a specified
analog input module of a
specified system in engineering
units only
Initializes all EEPROM data in a
specified analog input module to
their default values.
$aaSiØ Span Calibration Calibrates a specified analog
input module to correct for gain
errors
$aaSi1 Zero Calibration Calibrates a specified analog
input module to correct for offset
errors
$aaSi3 CJC Status Returns the value of the CJC
(Cold Junction Compensation)
sensor for a specified analog
input module
$aaSi9shhhh CJC Zero Calibration Calibrates a CJC sensor for
offset errors
Table 6-5: ADAM-5017/5018 Analog Input command Set Table
ADAM-5000/TCP User’s Manual 6-63