B&B Electronics ADAM-5000_TCP - Manual - Manual (Page 107)

Chapter 6 Planning Your Application Program
Every command set category starts with a command summary of the
particular type of module, followed by datasheets that give detailed in-
formation about individual commands. Although commands in different
subsections sometime share the same format, the effect they have on a
certain module can be completely differ- ent than that of another.
Therefore, the full command sets for each type of modules are listed
along with a description of the effect the command has on the given
module.
6-4-2 System Command Set
Command Syntax Command Name Description
%aannccff Configuration
Set the baudrate and checksum status for a specified ADAM-
5000 system
$aa2 Configuration Status
Returns the configuration status for a specified
ADAM-5000 system
$aaM Read Module Name
Returns the module name from a specified
ADAM-5000/TCP system
$aaF
Read Firmware
Returns the firmware version code from a specified ADAM-
5000/TCP system Version
$aaT Read I/O Type
Returns the I/O model number of all slots for a specified
ADAM-5000/TCP system
Table 6-2: CPU Command Set Table
6-40 ADAM-5000/TCP User’s Manual