B&B Electronics ADAM-5000_TCP - Manual - Manual (Page 126)

Planning Your Application Program Chapter 6
$aaSi0
Name RTD Span Calibration
Description Calibrates a specified RTD input module of a speci-
fied system to correct for gain errors.
Syntax $aaSi0(cr)
$ is a delimiter character.
aa (range 00-FF) represents the 2-character hexadeci-
mal
address of the ADAM-5000/TCP system which con-
tains the RTD module.
Si identifies the slot i (i:0 to 7) containing the RTD
module to be calibrated.
0 represents the span calibration command.
(cr) is the terminating character, carriage return (0Dh).
Response. !aa(cr) if the command is valid.
?aa(cr) if an invalid operation was entered. There is
no response if the module detects a syntax error or
communication error or if the specified ad- dress
does not exist.
> delimiter character indicating a valid command was
received.
? delimiter character indicating the command was in-
valid.
aa (range 00-FF) represents the 2-character hexadeci-
mal address of an ADAM-5000/TCP system.
(cr) is the terminating character, carriage return (0Dh).
ADAM-5000/TCP User’s Manual
6-59