B&B Electronics ADAM-5000_TCP - Manual - Manual (Page 49)

Chapter 5 System Hardware Configuration
The top of the operation screen consists of a function menu and a tool
bar for user’s commonly operating functions.
Function menu
Item File contents “Exit” Function, using to exit this Utility program.
Item Tool contents functions as below:
Add Remote 5000/TCP : Create a new ADAM-5000/TCP located in other
Ethernet domination, both available to local
LAN and Internet application.
Search for 5000/TCP: Search all ADAM-5000/TCP units in the
spe- cific Ethernet domination. ( the same with
host PC’s Ethernet domination)
Refresh 5000/TCP: Refresh the specific ADAM-5000/TCP unit to verify
the system status.
Terminal: Call up the operation screen of Terminal emulation to do
the request / response command execution.
Monitor Data Stream: Call up the monitoring screen of stream data from
specific ADAM-5000/TCP.
Item Setup contents Timeout and Scan Rate setting functions. Please be
aware of the time setting for other Ethernet domination usually longer
than local network.
Item About contents information about software version, released date,
and support modules.
5-4 ADAM-5000/TCP User’s Manual