B&B Electronics ADAM-5000_TCP - Manual - Manual (Page 201)

Chapter 6 Planning Your Application Program
> is a delimiter character indicating a valid command
was received.
? delimiter character indicating the command was
invalid.
(cr) is the terminating character, carriage return (0Dh)
Example command: #01S1C106.000(cr)
response: >(cr) The command instructs the module
in slot 1 of the ADAM-5000/TCP system at address
01h to output a value of 6 mA from it’s channel 1. The
module should be an analog output module with it’s
channel 1 con- figured for a range of 0-20 mA or 4-
20 mA. If it is an analog output module configured
for the range 0-10
V, it’s output value will be 10 V and the response will
be ?01(cr).
6-132 ADAM-5000/TCP User’s Manual