Boot loader lock bits, Figure 133), Figure 133 – Rainbow Electronics ATmega128L User Manual
Page 268: Atmega128(l)

268
ATmega128(L)
2467B–09/01
Figure 133. Memory Sections
Note:
1. The parameters in the figure above are given in
Boot Loader Lock Bits
If no Boot Loader capability is needed, the entire Flash is available for application code.
The Boot Loader has two separate sets of Boot Lock Bits which can be set indepen-
dently. This gives the user a unique flexibility to select different levels of protection.
The user can select:
•
To protect the entire Flash from a software update by the MCU
•
To protect only the Boot Loader Flash section from a software update by the MCU
•
To protect only the Application Flash section from a software update by the MCU
•
Allow software update in the entire Flash
See
Table 109 and Table 110 for further details. The Boot Lock bits can be set in soft-
ware and in Serial or Parallel Programming mode, but they can be cleared by a chip
erase command only. The general Write Lock (Lock Bit Mode 2) does not control the
programming of the Flash memory by SPM instruction. Similarly, the general
Read/Write Lock (Lock Bit Mode 1) does not control reading nor writing by LPM/SPM, if
it is attempted.
$0000
Flashend
Program Memory
BOOTSZ = '11'
Application Flash Section
Boot Loader Flash Section
Flashend
Program Memory
BOOTSZ = '10'
$0000
Program Memory
BOOTSZ = '01'
Program Memory
BOOTSZ = '00'
Application Flash Section
Boot Loader Flash Section
$0000
Flashend
Application Flash Section
Flashend
End RWW
Start NRWW
Application flash Section
Boot Loader Flash Section
Boot Loader Flash Section
End RWW
Start NRWW
End RWW
Start NRWW
$0000
End RWW, End Application
Start NRWW, Start Boot Loader
Application Flash Section
Application Flash Section
Application Flash Section
Read While Write Section
No Read While Write Section
Read While Write Section
No Read While Write Section
Read While Write Section
No Read While Write Section
Read While Write Section
No Read While Write Section
End Application
Start Boot Loader
End Application
Start Boot Loader
End Application
Start Boot Loader