EVS IPDirector Version 5.8 - July 2010 Part 7 User's Manual - Manual (Page 95)

Issue 5.8.B IPDirector V.5.8 – User Manual – Part 7: Editing - IPEdit
EVS Broadcast Equipment - July 2010
82
This selection is used in combination with the Replace by command to replace all
selected clips by another camera angle.
The selection based on the recorded camera angle is done according to the
following rules:
• Only elements on the activated A/V tracks will be selected.
• Only elements recorded on the selected camera will be selected.
• If mark IN and mark OUT points are defined, only relevant elements between
the marks are taken into account for the selection.
• If no mark IN/OUT are defined, all relevant elements on the selected tracks
are taken into account for the selection.