EVS IPDirector Version 5.8 - July 2010 Part 7 User's Manual - Manual (Page 197)

Issue 5.8.B IPDirector V.5.8 – User Manual – Part 7: Editing - IPEdit
EVS Broadcast Equipment - July 2010
184
After
4.14.8 I
NCREASING OR
D
ECREASING THE
V
OLUME ON
P
ART OF A
T
RACK
H
OW TO
D
ECREASE OR
I
NCREASE THE
V
OLUME ON A
P
ART OF
A
T
RACK
To increase or decrease the volume on part of a track displayed in the Volume
Automation panel, proceed as follows:
1. Delimit the part of the track on which you want to increase the volume as
follows:
a. Add a mark IN point at the position to start the volume increase or
decrease.
b. Add a mark OUT point at the position to stop the volume increase or
decrease.
2. Drag the part of the track between the mark IN and mark OUT points up
(increase) or down (decrease) with the left mouse button.
3. Release the mouse button when the part of the track selected is positioned
at the requested audio level.