EVS IPDirector Version 5.8 - July 2010 Part 7 User's Manual - Manual (Page 109)

Issue 5.8.B IPDirector V.5.8 – User Manual – Part 7: Editing - IPEdit
EVS Broadcast Equipment - July 2010
96
R
EPLACING
T
IMELINE
E
LEMENTS
F
ROM
IN
TO
OUT P
OINTS
Description
The following schema shows how the Match Frame Replace is performed when
timeline elements are replaced from their IN to OUT points:
Procedure
To replace one or more timeline element(s) of the same source clip using the
Match Frame Replace function, proceed as follows:
1. In the Player and Timeline panes, select the tracks to be taken into account
when you will insert the media. See also the section ‘Track Selection
Applied to the Timeline Element’, on page 90.
2. In the Player panel, load the clip or train that contains the material to be
inserted into the timeline.
3. Click in the jog bar to define the reference frame position in the loaded
media.
4. In the loaded timeline, place the nowline on the element(s) to be replaced.
5. Do one of the following to execute the Match Frame Replace:
• Click the Match Frame Replace icon in the Player.
• Press on the keyboard.
The timeline element(s) whose tracks are selected and where the nowline is
positioned are replaced by the media loaded in the Player. In this action, the
reference position in the Player is matched to the nowline in the timeline.