EVS IPDirector Version 5.8 - July 2010 Part 7 User's Manual - Manual (Page 174)

IPDirector V.5.8 – User Manual – Part 7: Editing - IPEdit
EVS Broadcast Equipment – July 2010
Issue 5.8.B
161
8. Click the Add button.
The transition effects are added to the beginning transitions of the elements that
are covered by the mark IN and mark OUT points and that are selected in the
Track group box. The effects have the settings defined in the Transition Effect
group box and the GPIs defined on the video track, if any:
H
OW TO
A
DD
E
FFECTS
A
UTOMATICALLY TO
N
EW
E
LEMENTS
The IPEdit module is open and the timeline on which you want to add automatic
transition effects is loaded in the Timeline pane.
To add transition effects automatically to new elements, proceed as follows:
1. Open the menu Tools > Settings and select the category IPEdit > General.
2.
In the Transition Effects group box, select ‘AutomaticVideo’ in the Mode
drop-down list.
Then specify the transition effect settings to be applied automatically to
the video track of new clips placed in the timeline:
• effect type (mix or wipe)
• effect duration in seconds and frames (even number, min. 2 frames)
• effect position (before cut, centered, after cut)
For example:
3. In the Transition Effects group box, select ‘AutomaticAudio’ in the Mode
drop-down list.
Then specify the settings the transition effect settings to be applied
automatically to the audio track(s) of new clips placed in the timeline: