EVS IPDirector Version 5.8 - July 2010 Part 7 User's Manual - Manual (Page 140)

IPDirector V.5.8 – User Manual – Part 7: Editing - IPEdit
EVS Broadcast Equipment – July 2010
Issue 5.8.B
127
T
RIM
L
EFT IN
O
VERWRITE
M
ODE
In a trim left performed in Overwrite mode, the OUT point of an element is shifted
to the right (i.e. element extended) or to the left (i.e. element trimmed), impacting
what follows in the timeline:
• When the OUT point of the element is shifted to the right, the next element is
reduced by an equivalent duration.
• When the OUT point of the element is shifted to the left, a blank of an
equivalent duration is added after the trimmed element.
Example: Shift to the right
The following example shows a trim left in Overwrite mode where the element is
extended. The following element is trimmed by the same duration at its IN point.
Before the trim action
During the trim action
After the trim action