EVS IPDirector Version 5.8 - July 2010 Part 7 User's Manual - Manual (Page 153)

Issue 5.8.B IPDirector V.5.8 – User Manual – Part 7: Editing - IPEdit
EVS Broadcast Equipment - July 2010
140
4.10.6 H
OW TO
S
LIP AN
E
LEMENT BY
S
ETTING A
N
EW
T
IMECODE
You can slip one or more element(s) by redefining either the TC IN or TC OUT. If
several elements are selected, they must belong to the same source media and
have the same TC IN and OUT.
To slip an element by modifying the timecode, proceed as follows:
1. Select one or more elements of the same source media.
2. Right-click on the selected elements and select Set Timecode from the
contextual menu.
The Slip Timecode dialog box opens:
3. Enter the new requested TC IN or TC OUT and click ENTER to validate the
new TC value.
4. Click Apply.
The TC IN and TC OUT of the selected elements have been modified according to
the new TC information entered.
If the new timecode defined is not available in the record train, an error message
will be displayed.