EVS IPDirector Version 5.8 - July 2010 Part 7 User's Manual - Manual (Page 38)

IPDirector V.5.8 – User Manual – Part 7: Editing - IPEdit
EVS Broadcast Equipment – July 2010
Issue 5.8.B
25
User
Interface
Keyboard
Shortcut ShuttlePRO key Description
- - Goes 10 frames after the position in
Pause mode.
3.6.3 H
OW TO
C
REATE A
C
LIP
B
ASED ON THE
L
OADED
M
EDIA
By double-clicking the media in the Browser, you will load the media to the Player.
To create a clip based on the loaded media, proceed as follows:
1. Place the blue position indicator where you want to add a mark IN point and
click the Mark IN button.
The TC of the mark IN point is displayed in the related TC field.
2. Place the blue position indicator where you want to add a mark OUT point
and click the Mark OUT button. The TC of the mark OUT point and the clip
duration are displayed in the related fields.
3. Click SAVE. The Save Clip window opens.
4. Fill in the Name field, and if requested, keyword fields, interest level, clip
type and metadata fields. For more information, on the Clip Creation
window, refer to the Control Panel chapter.
5. Click SAVE.
The Save Clip window closes, the new clip element and clip are created and
added to the Browser.