EVS IPDirector Version 5.8 - July 2010 Part 7 User's Manual - Manual (Page 110)

IPDirector V.5.8 – User Manual – Part 7: Editing - IPEdit
EVS Broadcast Equipment – July 2010
Issue 5.8.B
97
R
EPLACING
T
IMELINE
E
LEMENTS
F
ROM
N
OWLINE TO
OUT
P
OINTS
Description
The following schema shows how the Match Frame Replace is performed when
timeline elements are replaced from the nowline to the OUT point:
Procedure
To replace one or more timeline element(s) of the same source clip from the
nowline to the OUT point using the Match Frame Replace function, proceed as
follows:
1. In the Player and Timeline panes, select the tracks to be taken into account
when you will insert the media. See also the section ‘Track Selection
Applied to the Timeline Element’, on page 90.
2. In the Player panel, load the clip or train that contains the material to be
inserted into the timeline.
3. Click in the jog bar to define the reference position in the loaded media.
4. In the loaded timeline, place the nowline on the element(s) to be replaced
from the nowline to the OUT point.
5. Do one of the following to execute the Match Frame Replace:
• Click + simultaneously in the Player.
• Press + on the keyboard.
The timeline element(s) whose tracks are selected are replaced by the media
loaded in the Player from the nowline to their OUT point. In this action, the
reference position in the Player is matched to the nowline in the timeline.