EVS IPDirector Version 5.8 - July 2010 Part 7 User's Manual - Manual (Page 183)

Issue 5.8.B IPDirector V.5.8 – User Manual – Part 7: Editing - IPEdit
EVS Broadcast Equipment - July 2010
170
4.13.6 M
ANUAL
S
WAP
D
EFINITION IN THE
S
WAP
/M
UTE
Z
OOM
M
ODE
D
ESCRIPTION
You can swap one or more channels of an audio track and apply the swap to these
channels from a point to another point of the audio track. You will specify the start
and end points as follows:
• with a mark IN on the start point and a mark OUT on the end point.
• with the nowline on the start point. In this case, the swap is applied up to the
end of the element where the nowline is positioned.
You can define such a swap in the Swap/Mute Configuration window accessible
when right-clicking in the audio track and selecting Add Swap/Mute.
E
XAMPLE
Initial Situation
The timeline audio configuration is 4 tracks of 2 channels. You want to play the
channels a7 and a8 (G4 track) of the source media onto the output channels a5
and a6 respectively (G3 track) of the selected part of the track.
Manual Swap Action
You will perform the swap action from a given point to another point of the G3
track. In this track, you specify which source channels will be played on the
channels of the G3 track. In this case, you will map:
• the source channel a7 to the output channel a5 and
• the source channel a8 to the output channel a6.