Garmin G1000 Mooney M20TN - Manual (Page 91)

190-00647-00 Rev. A Garmin G1000 Pilot’s Guide for the Mooney M20M/M20R/M20TN 4-11
AUDIO PANEL AND CNS
Frequencies can be automatically loaded into the COM Frequency Box by highlighting the frequency and
pressing the ENT Key as illustrated in Figures 4-11 and 4-12.
Auto-tuning from the MFD:
1) From any page that the COM frequency can be auto-tuned, activate the cursor by pressing the FMS Knob or the
appropriate softkey.
2) Turn the FMS Knob to place the cursor on the desired COM frequency.
3) Press the ENT Key to load the COM frequency into the standby field of the selected COM radio.
4) Press the Frequency Transfer Key to transfer the frequency to the COM Active Frequency Field.
Press the ENT Key to
Load a Highlighted
Frequency into the COM
Standby Frequency Box
Turn the FMS
Knob to Scroll
Through a List
of Frequencies
Figure 4-11 Frequency Auto-Tuning
Figure 4-12 WPT – Airport Information Page
Press ENT Key to Load
Frequency into COM
Standby Field. Cursor
then Advances to
Next Frequency.
Press INFO Softkey for
AIRPORT, RUNWAYS,
and FREQUENCIES
Windows
Selected Airport
Identifier and
Information
Runway
Information
Press Frequency
Transfer Key to Load
Frequency into COM
Active Tuning Box