Garmin G1000 Mooney M20TN - Manual (Page 111)

190-00647-00 Rev. A Garmin G1000 Pilot’s Guide for the Mooney M20M/M20R/M20TN 4-31
AUDIO PANEL AND CNS
FLIGHT ID REPORTING
NOTE: If the Flight ID is required but the system is not configured for it, contact a Garmin-authorized service
center for configuration.
When the flight crew must enter the Flight ID before flight operation, the number is entered in the Timer/
References Window. The flight ID is not to exceed seven characters. No space is needed when entering Flight
ID. When a Flight ID contains a space, the system automatically removes it upon completion of Flight ID
entry.
Entering a Flight ID:
1) Press the TMR/REF Softkey to display the Timer/References Window.
2) Press the FMS Knob to activate the selection cursor.
3) Turn the FMS Knob to enter the desired Flight ID.
4) Press the ENT Key to complete Flight ID entry.
If an error is made during Flight ID entry, pressing the CLR Key moves the cursor back one space for each
press of the key. If an incorrect Flight ID is discovered after the unit begins operation, reenter the correct Flight
ID using the same procedure.
Figure 4-43 Timer/References Window, Entering Flight ID
Flight ID
PFD Entry