Garmin G1000 Mooney M20TN - Manual (Page 229)

5-111 190-00647-00 Rev. A Garmin G1000 Pilot’s Guide for the Mooney M20M/M20R/M20TN
GPS NAVIGATION
Another Procedures Window option allows the pilot to select vectors to the final approach course.
Activating a (previously loaded) approach, with vectors to final:
1) Press the PROC Key to display the Procedures Window.
2) Highlight ‘ACTIVATE VECTOR-TO-FINAL’ and press the ENT Key.
In many cases, it may be easiest to “Load” the full approach while still some distance away, enroute to
the destination airport. Later, if vectored to final, use the steps above to select ‘Activate Vector-To-Final’
— which makes the inbound course to the FAF waypoint active. Otherwise, activate the full approach using
the ‘ACTIVATE APPROACH’ option.
Activating a Missed Approach:
1) Press the PROC key.
2) Turn the large FMS knob to highlight ‘ACTIVATE MISSED APPROACH’.
3) Press the ENT key. A confirmation window will be displayed.
4) With ‘ACTIVATE’ highlighted, press the ENT key.