Garmin G1000 Mooney M20TN - Manual (Page 151)

5-33
GPS NAVIGATION
190-00647-00 Rev. A Garmin G1000 Pilot’s Guide for the Mooney M20M/M20R/M20TN
5.4 DIRECT-TO-NAVIGATION (PFD)
NOTE: Section 5.2 describes the PFD Inset Map and PFD Windows. It is recommended that the user read this
section before beginning GPS navigation operations on the PFD.
Figure 5-27 PFD Direct-to Window
Waypoint Symbol
Facility Name
Identifier
City, State
Flight Plan
Waypoint List
Nearest
Waypoint List
Lat/Lon of Direct-to
Waypoint
Course to Selected Waypoint
Bearing From Waypoint
Distance to
Direct-to
Waypoint
Activate
Annunciation
Enter a Direct-to Destination
1) Press the Direct-to Key.
2) Place the cursor in the desired selection field.
3) Begin selecting the desired identifier, location, etc.
4) Press the ENT Key. The cursor is now flashing on ‘ACTIVATE?’.
5) Press the ENT Key to activate.
6) Press the ENT Key to highlight ‘Activate?’ or turn the large FMS Knob to highlight the ‘COURSE’ field.
7) Enter the desired course to the waypoint.
8) Press the ENT Key to highlight ‘ACTIVATE?’.
9) Press the ENT again to activate the Direct-to.