System overview, Figure 1-14 inset softkeys – Garmin G1000 Mooney M20TN User Manual
Page 25
![background image](/manuals/250443/25/background.png)
190-00647-00 Rev. A
Garmin G1000 Pilot’s Guide for the Mooney M20M/M20R/M20TN
1-15
SYSTEM OVERVIEW
• INSET
Displays Inset Map in PFD lower left corner
OFF
Removes Inset Map
DCLTR (3) Selects desired amount of map detail; cycles through declutter levels:
DCLTR (No Declutter): All map features visible
DCLTR-1: Removes land data
DCLTR-2: Removes land and SUA data
DCLTR-3: Removes everything except active flight plan
TRAFFIC
Displays/removes traffic information on Inset Map
TOPO
Displays/removes topographical data (e.g., coastlines, terrain, rivers, lakes) on Inset Map
TERRAIN
Displays/removes terrain information on Inset Map
NEXRAD
Displays/removes NEXRAD weather and coverage information on Inset Map (optional)
XM LTNG
Displays/removes XM lightning information on Inset Map (optional)
BACK
Press the
OFF or BACK Softkey to
return to the top-level softkeys.
DCLTR
DCLTR-2
DCLTR-3
DCLTR-1
TOPO
ALERTS
NEXRAD
(optional)
TERRAIN
XM LTNG
(optional)
OFF
TRAFFIC
INSET
INSET
XPDR
IDENT
TMR/REF
NRST
ALERTS
OBS
PFD
CDI
ADF/DME
(optional)
Press the
CDI Softkey to cycle through
navigation sources:
- GPS
- NAV1 (VOR/LOC)
- NAV2 (VOR/LOC)
ARC HSI
STD BARO
BACK
ALERTS
METRIC
DFLTS
360
HSI
PFD
BRG1
BRG2
DME
(optional)
Press the
BRG1/BRG2 softkeys to display/
remove the Bearing Information windows
and cycle through bearing sources:
- NAV1/NAV2
- GPS
- ADF
Press the
STD BARO or BACK Softkey
to return to the top-level softkeys.
Press the
BACK Softkey to return
to the top-level softkeys.
Press the
IDENT or BACK Softkey
to return to the top-level softkeys.
XPDR
STBY
ON
ALT
VFR
IDENT
BACK
ALERTS
CODE
IDENT
BACK
ALERTS
0
1
2
3
4
5
6
7
BKSP
Figure 1-14 INSET Softkeys
• PFD
Displays second-level softkeys for additional PFD configuration
METRIC
Displays Selected and current altitudes additionally in meters and changes barometric
setting to hectopascals (hPa) from inches of mercury (in Hg)
DFLTS
Resets PFD to default settings, including changing units to standard
DME
Displays/removes DME Information Window (optional)
BRG1
Cycles the Bearing 1 Information Window through:
NAV1: Waypoint frequency/identifier and DME information
GPS: Waypoint identifier and GPS distance information
ADF: Waypoint frequency
Off: Removes window
360 HSI
Displays the HSI as a 360° compass rose
ARC HSI
Displays the HSI as a 140° viewable arc (Bearing Information Windows unavailable)