Garmin G1000 Mooney M20TN - Manual (Page 196)

5-78 190-00647-00 Rev. A Garmin G1000 Pilot’s Guide for the Mooney M20M/M20R/M20TN
GPS NAVIGATION
Figure 5-66 Load Waypoint from Map Panning
Panning Location
Load Waypoint
Option
L
OAD DEPARTURE
‘Load Departure’ loads a published departure procedure into a flight plan. It replaces the current departure
with the new selection. When flying a direct-to, the G1000 uses the nearest airport as a reference when
displaying available departures. A published departure can be loaded into the flight plan using one of three
methods:
• LD DP Softkey
• PROC Key
• Active Flight Plan Page Options Menu
The loaded departure replaces the current departure with the new selection.
Loading a departure procedure using the LD DP Softkey:
1) From the Active Flight Plan Page, select the LD DP Softkey. The DEPARTURE window is displayed on the
‘PROC – DEPARTURE LOADING’ Page.
2) Select a departure.
3) Press the ENT Key. The RUNWAY window may be displayed.
4) Select a runway.
5) Press the ENT Key. The TRANSITION window may be displayed.
6) Select a transition.
7) Press the ENT Key.
6) With ‘LOAD’ highlighted, press the ENT Key. The departure procedure is displayed as part of the overall flight
plan and is placed in front of the enroute flight plan.