Garmin G1000 Mooney M20TN - Manual (Page 352)

190-00647-00 Rev. A Garmin G1000 Pilot’s Guide for the Mooney M20M/M20R/M20TN A-16
APPENDIX A
GMU 44 Message Advisories
Alerts Window Message Comments
HDG FAULT – AHRS1 magnetometer
fault has occurred. A fault has occurred in the GMU 44. Heading is flagged as invalid. The AHRS uses
GPS for backup mode operation. The G1000 system should be serviced.
MANIFEST – GMU1 software
mismatch. Communication halted.
The GMU 44 has incorrect software installed. The G1000 system should be serviced.
GDL 69 Message Advisories
Alerts Window Message Comments
GDL69 CONFIG – GDL 69 configura-
tion error. Config service req’d. GDL 69 configuration settings do not match those of backup configuration memory.
The G1000 system should be serviced.
GDL69 FAIL – GDL 69 has failed. A failure has been detected in the GDL 69. The receiver is unavailable. The G1000
system should be serviced
GDC 74A Message Advisories
Alerts Window Message Comments
GDC1 CONFIG – GDC1 configuration
error. Config service req’d. GDC 74A configuration settings do not match those of backup configuration
memory. The G1000 system should be serviced.
MANIFEST – GDC1 software
mismatch. Communication halted. The GDC 74A has incorrect software installed. The G1000 system should be
serviced.
BACKUP PATH – ADC1 using backup
data path. The GDC 74A is using a backup communications data path. The G1000 system
should be serviced when possible.