Hazard avoidance – Garmin G1000 Mooney M20TN User Manual
Page 285
![background image](/manuals/250443/285/background.png)
190-00647-00 Rev. A
Garmin G1000 Pilot’s Guide for the Mooney M20M/M20R/M20TN
6-49
HAZARD AVOIDANCE
Pop-up terrain alerts (Figure 6-54) can also appear on the MFD during an alert, but only when the TAWS
Page is not displayed. When an alert displays, the pilot can:
• Press the CLR Key. This acknowledges the pop-up alert and returns to the currently viewed page.
• Press the ENT Key. This acknowledges the pop-up alert and accesses the TAWS Page.
Figure 6-54 Alert Pop-up
Table 6-11 shows system status annunciations that may also be issued:
Alert Type
PFD/MFD TAWS
Page
Annunciation
MFD
Pop-Up Alert
Aural Message
TAWS System Test Fail
None
“TAWS System Failure”
TAWS Alerting is disabled
None
None
No GPS position or excessively degraded
GPS signal
None
“TAWS Not Available”
“TAWS Available” is generated when sufficient
GPS signal is re-established.
System Test in progress
None
None
System Test pass
None
None
“TAWS System Test OK”
Table 6-11 Additional System Annunciations