Garmin G1000 Mooney M20TN - Manual (Page 175)

5-57
GPS NAVIGATION
190-00647-00 Rev. A Garmin G1000 Pilot’s Guide for the Mooney M20M/M20R/M20TN
Viewing information about an airport:
1) Select the NRST Softkey to display a list of the nearest airports.
2) Select the desired airport.
3) Press the ENT Key.
4) The airport information is displayed with ‘BACK’ highlighted at the bottom of the window (Figure 5-48).
5) When finished viewing the airport information, press the ENT Key to return to the nearest airports list.
Activating a direct-to:
From the Nearest Airports Window, highlight the desired airport, then press the Direct-to Key. The Direct-to Window
appears. Press the ENT Key twice to activate.
Figure 5-48 Airport Information Window
Airport Identifier
Airport Symbol
Flight Plan List
City, State
NRST Airport List
Facility Name
Course Field
Bearing to
Direct-to
Waypoint
Distance to
Direct-to
Waypoint
Selecting a COM frequency:
From the Nearest Airports Window, highlight the desired frequency, then press the ENT Key. The frequency is placed
in the standby COM frequency field in the COM Tuning Box.
`
Figure 5-49 COM Frequency
COM Frequency