Garmin G1000 Mooney M20TN - Manual (Page 130)

5-12
GPS NAVIGATION
190-00647-00 Rev. A Garmin G1000 Pilot’s Guide for the Mooney M20M/M20R/M20TN
Terrain Data
Terrain data can be enabled or disabled on the Navigation Map Page using the ‘TERRAIN DATA’
setting. A data range can also be selected. The data range is the maximum map range that terrain data is
displayed.
Figure 5-10 TERRAIN Data
TERRAIN Scale
TERRAIN
Data Shown
on Map
TERRAIN Softkey
Enabling/disabling terrain data and to select a terrain data range:
1) With the Navigation Map Page displayed, press the MENU Key to display the Navigation Map Page MENU. The
cursor flashes on the ‘Map Setup’ option.
2) Press the ENT Key. The Map Setup MENU is displayed.
3) Select the ‘Map’ group.
4) Press the ENT Key.
5) Highlight the ‘TERRAIN DATA’ field.
6) Select ‘On’ or ‘Off’.
7) Press the ENT Key to accept the selected option. The flashing cursor highlights the range field. TERRAIN ranges
are from Off to 2000 nm.
8) To change the TERRAIN range setting, turn the small FMS Knob to display the range list.
9) Select the desired range
10) Press the ENT Key.
11) Press the FMS Knob to return to the Navigation Map Page.