Garmin G1000 Mooney M20TN - Manual (Page 297)

190-00647-00 Rev. A Garmin G1000 Pilot’s Guide for the Mooney M20M/M20R/M20TN 6-61
HAZARD AVOIDANCE
Displaying traffic on the Traffic Map Page:
1) Select the Map Page Group.
2) Select the second rectangular page icon.
3) Press the OPERATE Softkey to begin displaying traffic. ‘TAS OPERATING’ is displayed in the upper left corner of
the page.
4) Press the ALT MODE Softkey to change the altitude volume.
5) Select the desired altitude volume by pressing the BELOW , NORMAL , ABOVE , or UNREST (unrestricted) Softkey.
The selection is displayed in the Altitude mode field in the upper left.
6) Press the STANDBY Softkey to place the system in the Standby mode. ‘TAS STANDBY’ displays in the upper left
corner of the page.
7) Turn the Joystick clockwise to display a larger area or counter-clockwise to display a smaller area.
TRAFFIC MAP PAGE DISPLAY RANGE
The display range on the Traffic Map Page can be changed at any time.
Changing the display range on the Traffic Map Page:
1) Turn the RANGE Knob.
2) The following range options are available:
• 2 nm
• 2 and 6 nm
• 6 and 12 nm
• 12 and 24 nm
• 24 and 40 nm