Garmin G1000 Mooney M20TN - Manual (Page 150)

5-32
GPS NAVIGATION
190-00647-00 Rev. A Garmin G1000 Pilot’s Guide for the Mooney M20M/M20R/M20TN
DIRECT-TO NAVIGATION SHORTCUTS FROM THE MFD
A direct-to can be performed from any page displaying a single waypoint identifier (such as the Waypoint
pages for airports and NAVAIDS) by simply pressing the Direct-to Key and the ENT Key. For pages that
display a list of waypoints (e.g., the Nearest Airport Page), the desired waypoint must be highlighted with the
cursor before pressing the Direct-to Key.
Direct-to destinations may also be selected from the Navigation Map Page by panning to the desired
destination location, pressing the Direct-to Key, and then the ENT Key twice. If no airport, NAVAID or user
waypoint exists at the desired location, a temporary waypoint named ‘MAPWPT’ is automatically created at
the location of the map pointer.
Bearing and
Distance to
Direct-to Waypoint
Figure 5-26 Direct-to Navigation Using Map Panning
Panning Arrow
Direct-to Waypoint
Information
Selecting a direct-to destination from the Navigation Map Page (Figure 5-26):
1) From the Navigation Map Page, press the JOYSTICK to display the map pointer.
2) Move the JOYSTICK to place the map pointer at the desired destination location.
3) If the map pointer is placed on an existing airport, NAVAID, or user waypoint, the waypoint name is highlighted.
Press the Direct-to Key.
4) Press the ENT Key twice to navigate to the waypoint.
5) If the map pointer is placed on an open location, press the Direct-to Key.
6) Press the ENT Key twice to create a ‘MAPWPT’ waypoint and then navigate to it.