Garmin G1000 Piper PA-46 Matrix - Manual (Page 69)

190-01108-00 Rev. B Garmin G1000 Pilot’s Guide for the Piper PA-46 Mirage/Matrix 55
FLIGHT INSTRUMENTS
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EICAS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL
FEA
TURES
APPENDICES
INDEX
Speeds (V
R
, V
X
, V
Y
, F10, F20, and F36) cannot be changed, however the speed flags can be turned on/off
from the Timer/References Window. When active (on), the speed flags are displayed at their respective
locations to the right of the airspeed scale. By default, all speed flags are turned off when power is cycled.
Turning desired speeds flags on/off:
1) Select the TMR/REF Softkey.
2) Turn the large FMS Knob to highlight the ON/OFF field of the desired speed.
3) Turn the small FMS Knob clockwise to ON or counterclockwise to OFF.
4) To remove the window, press the CLR Key or select the TMR/REF Softkey.
Figure 2-5 Timer/References Window Figure 2-6 Timer/References Menu
Turning all speed flags ON/OFF:
1) Select the TMR/REF Softkey.
2) Press the MENU Key.
3) To activate all speed flags, press the ENT Key with ‘All References On’ highlighted.
4) To remove all speed flags, turn the FMS Knob to highlight ‘All References Off’ and press the ENT Key.
Restoring all defaults:
1) Select the TMR/REF Softkey.
2) Press the MENU Key.
3) Turn the FMS Knob to highlight ‘Restore Defaults’ and press the ENT Key.