Garmin G1000 Piper PA-46 Matrix - Manual (Page 533)

Garmin G1000 Pilot’s Guide for the Piper PA-46 Mirage/Matrix 190-01108-00 Rev. B 519
ADDITIONAL FEATURES
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EICAS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL
FEA
TURES
APPENDICES
INDEX
PRESETS
Up to 15 channels from any category can be assigned a preset number. The preset channels are selected by
selecting the PRESETS and MORE Softkeys. Then the preset channel can be selected directly and added to
the channel list for the Presets category.
Setting a preset channel number:
1) On the XM Radio Page, while listening to an Active Channel that is wanted for a preset, select the PRESETS
Softkey to access the first five preset channels (PS1 - PS5).
2) Select the MORE Softkey to access the next five channels (PS6 – PS10), and again to access the last five
channels (PS11 – PS15). Selecting the MORE Softkey repeatedly cycles through the preset channels.
3) Select any one of the (PS1 - PS15) softkeys to assign a number to the active channel.
4) Select the SET Softkey on the desired channel number to save the channel as a preset.
Figure 8-76 Accessing and Selecting XM Preset Channels
Select PRESETS to
Access the Preset
Channels Softkeys
Select MORE to Cycle
Through the Preset
Channels
Select SET
to Save Each
Preset Channel
Selecting the BACK Softkey, or waiting during 45 seconds of softkey inactivity, returns the system to the top
level softkeys.
VOLUME
Radio volume is controlled at each passenger station.