Passenger address (pa) system, Clearance recorder and player, Audio panel and cns – Garmin G1000 Piper PA-46 Matrix User Manual
Page 152
![background image](/manuals/250398/152/background.png)
190-01108-00 Rev. B
Garmin G1000 Pilot’s Guide for the Piper PA-46 Mirage/Matrix
138
AUDIO PANEL AND CNS
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EICAS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL FEA
TURES
APPENDICES
INDEX
PASSENGER ADDRESS (PA) SYSTEM
A passenger address system is available for delivering voice messages over the cabin speaker. Press and hold
the SPKR Key for two seconds to activate the passenger address. The SPKR Key Annunciator flashes about
once per second when the passenger address is active. When passenger address is activated, the COM MIC
Annunciators are extinguished, and the active COM frequencies on the PFDs change to white, indicating that
there is no COM selected. A Push-to-Talk (PTT) must be pressed to deliver PA announcements.
Figure 4-47 SPKR Key Selected for PA Announcements
PA is Selected on
the Audio Panel
CLEARANCE RECORDER AND PLAYER
The Audio Panel contains a digital clearance recorder that records up to 2.5 minutes of the selected COM
radio signal. Recorded COM audio is stored in separate memory blocks. Once 2.5 minutes of recording time
have been reached, the recorder begins recording over the stored memory blocks, starting from the oldest
block.
The PLAY Key controls the play function. Pressing the PLAY Key once plays the latest recorded memory
block. Pressing the PLAY Key while audio is playing begins playing the previously recorded memory block.
Each subsequent press of the PLAY Key selects the previously recorded memory block.
Pressing the MKR/MUTE Key during play of a memory block stops play. If a COM input signal is detected
during play of a recorded memory block, play is halted.
Powering off the unit automatically clears all recorded blocks.
Figure 4-48 Play Key