Hazard avoidance – Garmin G1000 Piper PA-46 Matrix User Manual
Page 352
Garmin G1000 Pilot’s Guide for the Piper PA-46 Mirage/Matrix
190-01108-00 Rev. B
338
HAZARD AVOIDANCE
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EICAS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL FEA
TURES
APPENDICES
INDEX
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EICAS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL FEA
TURES
APPENDICES
INDEX
Displaying weather on the Weather Radar Page:
1)
Select the Weather Radar Page in the Map Page Group with the FMS Knob.
2)
Select the MODE Softkey.
3)
While on the ground, select the STANDBY Softkey. A one-minute warm-up period is initiated (countdown is
displayed on the screen). After the warm-up is complete, the radar enters the Standby Mode.
a)
Select the WEATHER Softkey. A confirmation window is displayed.
Figure 6-54 Confirming Activating Radar
b)
Turn the small FMS Knob to highlight YES and press the ENT Key to continue radar activation.
Or
:
If the aircraft is airborne, select the WEATHER Softkey. A one-minute warm-up period is initiated (countdown
is displayed on the screen). After the warm-up is complete, the radar begins transmitting.
4)
Turn the RANGE Knob to select the desired map range.
5)
The horizontal scan is initially displayed (Figure 6-55). If desired, select the VERTICAL Softkey to change to
vertical scanning.