Garmin G1000 Piper PA-46 Matrix - Manual (Page 22)

190-01108-00 Rev. B Garmin G1000 Pilot’s Guide for the Piper PA-46 Mirage/Matrix 8
SYSTEM OVERVIEW
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EICAS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL FEA
TURES
APPENDICES
INDEX
5 Joystick Turn to change map range
Press to activate Map Pointer for map panning
6 CRS/BARO Knob Turn large knob for altimeter barometric pressure setting
Turn small knob to adjust course (only when HSI is in VOR or OBS Mode)
Press to re-center the CDI and return course pointer directly TO bearing of active
waypoint/station
7 COM Knob Turn to tune COM transceiver standby frequencies (large knob for MHz; small for
kHz)
Press to toggle light blue tuning box between COM1 and COM2
The selected COM (green) is controlled with the COM MIC Key (Audio Panel).
8 COM Frequency
Transfer Key
(EMERG) Transfers the standby and active COM frequencies
Press and hold 2 seconds to tune the emergency frequency (121.5 MHz) automatically
into the active frequency field
9 COM VOL/SQ Knob Turn to control COM audio volume level (shown as a percentage in the COM
Frequency Box)
Press to turn the COM automatic squelch ON/OFF
10 Direct-to Key ( ) Activates the direct-to function and allows the user to enter a destination waypoint
and establish a direct course to the selected destination (specified by identifier,
chosen from the active route)
11 FPL Key Displays flight plan information
12 CLR Key
(DFLT MAP) Erases information, cancels entries, or removes menus
Press and hold to display the MFD Navigation Map Page (MFD only).
13 MENU Key Displays a context-sensitive list of options for accessing additional features or making
setting changes
14 PROC Key Gives access to IFR departure procedures (DPs), arrival procedures (STARs), and
approach procedures (IAPs) for a flight plan or selected airport
15 ENT Key Validates/confirms menu selection or data entry
16 FMS Knob
(Flight Management
System Knob)
Press to turn the selection cursor ON/OFF.
Data Entry: With cursor ON, turn to enter data in the highlighted field (large
knob moves cursor location; small knob selects character for highlighted cursor
location)
Scrolling: When a list of information is too long for the window/box, a scroll bar
appears, indicating more items to view. With cursor ON, turn large knob to scroll
through the list.
Page Selection: Turn knob on MFD to select the page to view (large knob selects a
page group; small knob selects a specific page from the group)
17 Softkey Selection
Keys Press to select softkey shown above the bezel key on the PFD/MFD display
18 ALT Knob Sets the Selected Altitude, shown above the Altimeter (the large knob selects the
thousands, the small knob selects the hundreds)