beautypg.com

Automatic flight control system – Garmin G1000 Piper PA-46 Matrix User Manual

Page 459

background image

190-01108-00 Rev. B

Garmin G1000 Pilot’s Guide for the Piper PA-46 Mirage/Matrix

445

AUTOMATIC FLIGHT CONTROL SYSTEM

SY

STEM

O

VER
VIEW

FLIGHT

INSTRUMENTS

EICAS

AUDIO P

ANEL

& CNS

FLIGHT

MANA

GEMENT

HAZARD

AV

OID
ANCE

AFCS

ADDITIONAL

FEA
TURES

APPENDICES

INDEX

Vertical Path Tracking descent to VNV Target Altitude:

1)

Select VNV flight control:

a)

Press the VNV Key to arm Vertical Path Tracking Mode. The white annunciation ‘VPTH’ appears.

b)

Using the ALT SEL Knob, set the Selected Altitude below the flight plan’s VNV Target Altitude of 10,000 feet.

If the Selected Altitude is not at least 75 feet below the VNV Target Altitude, the flight director captures the
Selected Altitude rather than the VNV Target Altitude once Vertical Path Tracking Mode becomes active (ALTS
becomes armed rather than ALTV).

c)

If Vertical Path Tracking Mode is armed more than 5 minutes prior to descent path capture, acknowledgment is
required for the flight director to transition from Altitude Hold to Vertical Path Tracking Mode. To proceed with
descent path capture if the white ‘VPTH’ annunciation begins flashing, do one of the following

• Press the VNV Key

• Turn the ALT SEL Knob to adjust the Selected Altitude

If the descent is not confirmed by the time of interception, Vertical Path Tracking Mode remains armed and the
descent is not captured.

2)

When the top of descent (TOD) is reached, the flight director transitions to Vertical Path Tracking Mode and
begins the descent to the VNV Target Altitude. Intention to capture the VNV Target Altitude is indicated by the
white ‘ALTV’ annunciation.

3)

As the aircraft nears the VNV Target Altitude, the flight director transitions to VNV Target Altitude Capture Mode,
indicated by the green ‘ALTV’ annunciation flashing for up to 10 seconds.

The green ‘ALT’ annunciation flashes for up to 10 seconds upon reaching 50 feet from the VNV Target Altitude;
the autopilot transitions to Altitude Hold Mode and levels the aircraft at the vertical waypoint.

Figure 7-39 VPTH Descent

3 nm

Cruise Altitude of 12,000 MSL

VNAV Target Altitude of 10,000 MSL

ALT Mode

VPTH Mode

Selected Altitude (set below VNAV Target Altitude)

1

2

3

TOD

BOD

ALT Mode

Along-track Offset, 3 nm before OPSHN

This manual is related to the following products: