Garmin G1000 Piper PA-46 Matrix - Manual (Page 121)

190-01108-00 Rev. B Garmin G1000 Pilot’s Guide for the Piper PA-46 Mirage/Matrix 107
AUDIO PANEL AND CNS
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EICAS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL
FEA
TURES
APPENDICES
INDEX
1 MENU Key – Displays a list of options for accessing additional features or making setting changes.
2 Alphanumeric Keys – Allows data entry (rather than using the FMS Knob to select characters/
numbers).
3 BKSP Key – Moves cursor back one character space and removes last character entered.
4 ENT Key – Validates or confirms a menu selection or data entry.
5 CLR Key – Erases information, cancels entries, or removes menus.
6 SEL Key – Arrows move light blue Softkey Selection Box on selected display. Press the center to activate
the selected softkey
7 Decimal Key – Enters a decimal point.
8 NAV Key – Selects NAV radio tuning mode on the MFD/PFD Control Unit. The NAV tuning box is
outlined with a light blue selection line when the NAV frequency is active on the control unit.
9 COM Key – Selects COM radio tuning mode on the MFD/PFD Control Unit. The COM tuning box is
outlined with a light blue selection line when the COM frequency is active on the control unit.
10 Frequency Transfer Key (EMERG) – Transfers the standby and active COM or NAV frequencies. Press
and hold for two seconds to tune the emergency frequency (121.500 MHz) automatically into the COM
active frequency field.
11 PFD Key – When selected, the control unit is used to access PFD functions.
12 MFD Key – When selected, the control unit is used to access MFD functions (default control mode).
13 FMS/NAV-COM Knob – NAV/COM Tuning Modes: Acts as the NAV or COM Knob. MFD/PFD Control
Modes: Acts as the FMS Knob.