Garmin G1000 Piper PA-46 Matrix - Manual (Page 554)

Garmin G1000 Pilot’s Guide for the Piper PA-46 Mirage/Matrix 190-01108-00 Rev. B
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EICAS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL FEA
TURES
APPENDICES
INDEX
540
APPENDIX A
Message Comments
DB MISMATCH – Standby navigation
database mismatch. The PFDs and MFD have different standby navigation database versions or types
installed (Americas, European, etc.). Crossfill is off. Install correct navigation
database version or type in all displays.
DB MISMATCH – Terrain database
version mismatch. The PFDs and MFD have different terrain database versions installed. Install correct
terrain database version in all displays.
DB MISMATCH – Terrain database type
mismatch. The PFDs and MFD have different terrain database types installed. Install correct
terrain database type in all displays.
DB MISMATCH – Obstacle database
version mismatch. The PFDs and MFD have different obstacle database versions installed. Install correct
obstacle database version in all displays.
DB MISMATCH – Airport Terrain
database mismatch. The PFDs and MFD have different airport terrrain databases installed. Install correct
airport terrain database in all displays.
NAV DB UPDATED – Active navigation
database updated. System has updated the active navigation database from the standby navigation
database.
TERRAIN DSP – [PFD1, PFD2 or MFD1]
Terrain awareness display unavailable. One of the terrain, airport terrain, or obstacle databases required for TAWS in the
specified PFD or MFD is missing or invalid.
GMA 347 MESSAGE ADVISORIES
Message Comments
GMA1 FAIL – GMA1 is inoperative. The audio panel self-test has detected a failure. The audio panel is unavailable. The
G1000 system should be serviced.
GMA1 CONFIG – GMA1 config error.
Config service req’d. The audio panel configuration settings do not match backup configuration memory.
The G1000 system should be serviced.
MANIFEST – GMA1 software
mismatch, communication halted.
The audio panel has incorrect software installed. The G1000 system should be serviced.
GMA1 SERVICE – GMA1 needs
service. Return unit for repair. The audio panel self-test has detected a problem in the unit. Certain audio functions may
still be available, and the audio panel may still be usable. The G1000 system should be
serviced when possible.
GIA 63W MESSAGE ADVISORIES
Message Comments
GIA1 CONFIG – GIA1 config error.
Config service req’d.
The GIA1 and/or GIA2 configuration settings do not match backup configuration
memory. The G1000 system should be serviced.
GIA2 CONFIG – GIA2 config error.
Config service req’d.
GIA1 CONFIG – GIA1 audio config
error. Config service req’d.
The GIA1 and/or GIA2 have an error in the audio configuration. The G1000 system
should be serviced.
GIA2 CONFIG – GIA2 audio config
error. Config service req’d.
GIA1 COOLING – GIA1 temperature
too low.
The GIA1 and/or GIA2 temperature is too low to operate correctly. Allow units to
warm up to operating temperature.
GIA2 COOLING – GIA2 temperature
too low.