Xerox 480 ST - Manual (Page 82)

Page 11 - 4 Xerox Document Centre System Administration Guide
g) Insert CentreWare Networks Services CD-ROM and
click Have Disk.
h) Click the Browse button and select the directory
containing the Windows NT drivers. Details for this are
contained in the document entitled Network Services
Guide. Select the PRINTER.INF file then click Open.
i) The Wizard will return you to the previous dialog. Verify
the path and file name are correct and click OK.
j) At the next dialog, enter a name for the printer and select
whether you want that printer to be the default then click
Next>.
k) If the printer will not be shared, click Next>. To share
the printer, check the share checkbox, enter a Share
Name, then click Next>.
l) At the next dialog it is recommended that you print a test
page. Click Finish.
m) Wait for the Test Print to print. A new dialog will ask for
confirmation of the test print; if the page printed, click
Yes. If it did not print, run the Printing Troubleshooter in
NT.
3. Send a test job to the printer.
a) Check your test job for quality and use the problem
solving section of the Document Centre Reference
Guide for resolving print defects.
b) If your print job does not print, refer to the
Troubleshooting section in this document to correct the
problem.