Xerox 480 ST - Manual (Page 29)

Xerox Document Centre System Administration Guide Page 3 - 1
3.
Dy
nami
c/
St
at
ic
IP
Addr
es
se
s and
WI
NS
3
. Dyn
a
mic
/S
ta
ti
c
IP
Ad
dre
ss
e
s and WIN
S
3. Dynamic/Static IP Addresses and
WINS
Before you start
NOTE Your Document Centre now has DHCP, LPR, and NetBIOS over
the IP protocol enabled by default. If your DHCP server will
provide host name, IP address, Gateway address, and Subnet Mask,
the Document Centre TCP/IP information will be configured on
initial boot.
Your Document Centre printer can be connected to a variety of
networks that use the TCP/IP protocol. You may either choose to
allow the device to retrieve a dynamic address or you may select to
enter one manually. This section contains procedures for both of
these methods. Determine which method will be used for your
network and follow the steps of the appropriate procedure.