Xerox 480 ST User Manual
Page 102
Page 15 - 2
Xerox Document Centre System Administration Guide
3.
Enable Banyan VINES printing.
a) Wait for the screen to refresh and press the Connectivity
and Network Setup button.
b) Wait for the screen to refresh and press the Network
Setup button.
c) Press
the
Banyan VINES button.
d) Press
the
Protocol button.
e) Press
the
Enable button to start the Banyan Vines
protocol and press Save.
4.
Configure User Name settings and Password.
a) At the next screen, press the Settings button.
b) At the next screen, press the User Name/PC Print
Destination button, enter the desired text for this item
using the touch panel keys, then press Save.
c) Press
the
User Password button. Enter the desired text
for this item using the touch panel keys, then press Save.
d) Press
the
Print Service Name button. Enter the desired
text for this item using the touch panel keys. When
finished press the Save button twice to record the
changes.
5.
Exit the Tools Menu.
a) Press
the
Exit Tools button. The printer will store the
settings you have made.
6.
Print a Configuration Report page from your printer to use
in the remainder of the installation.
a) Repeat Steps 2a and 2c.
b) Select
System Setting.
c) Select
Configuration Report.
d) Select
Print Configuration Report Now.
e) Select
Cancel.