Xerox 480 ST - Manual (Page 292)

Page 21 - 4 Xerox Document Centre System Administration Guide
HTTP
Note: Internet Services (HTTP/IPP) must be enabled, if it
is not follow these procedures.
1. Go to the Document Centre control panel.
2. Enter the Tools pathway.
a) Press the Access ( or ) button.
b) On the keypad enter 1111 or the current password. Press
the Enter button when finished. The Touch Screen will
be used for the remainder of the data entry, unless
instructed otherwise.
c) Press the Go to Tools button.
3. Enter Network Setup.
a) Wait for the screen to refresh and press the Connectivity
and Network Setup button.
b) Wait for the screen to refresh and press the Network
Setup button.
4. Enable HTTP/IP.
a) Press the TCP/IP Options button.
b) Press the HTTP/IPP button.
c) Press the Enable button.
d) Press the Save button.
e) Press the Close button - 3 times.
5. Is E-mail enabled?
a) If yes, then Press the Exit Tools button.
b) If no, continue to next page.