Xerox 480 ST - Manual (Page 78)

Page 10 - 4 Xerox Document Centre System Administration Guide
d) The Wizard will automatically detect the Printer Model
for you. If that does not happen select Standard and
choose the your Printer Model from the pull-down
menu.
e) Click Finish. Go to Step 3.
To Create an IPP printer
a) Select Network Printer. Click Next.
b) Select Connect to a printer on the Internet or on your
intranet. Type HTTP:// followed by the printer’s fully
qualified Domain name or IP address in the URL field.
The Printer Name can be either the Host Name or the
SMB Host Name as shown on the configuration report,
depending on the name resolution used by your network
(WINS or DNS). Click Next.
c) Click OK to install the printer driver. Go to Step 3.
3. Select the driver to be used (Document Centre 480/470/460
drivers are included on the Windows 2000 CD-ROM).
a) A driver list will be displayed. Select Xerox from the
Manufacturers: area. Then select the desired print
driver from the Printers: and click OK. The driver will
be installed.
b) The Default Printer window will open. Select Yes to
make this the default printer, otherwise click the Next>
button.
c) At the Completing the Add Printer Wizard screen,
click the Finish button.
d) Print a Test Page. Verify that it prints. Repeat this Go
to the Server Workstation and... procedure for each
workstation on the network that will print to the printer.