E-mail authentication – Xerox 480 ST User Manual
Page 304
Page 21 - 16
Xerox Document Centre System Administration Guide
E-mail Authentication
For login in authentication you must enable it at the Document
Centre 490/480/470/460 ST Control Panel. Complete the following
steps:
1.
Enter the Tools pathwa. y
a) Press the Access ( or
) button.
b) On the keypad enter 1111 or the current password. Press
the Enter button when finished. The Touch Screen will
be used for the remainder of the data entry, unless
instructed otherwise.
c) Press
the
Go to Tools button.
2.
Set up Authentication:
a) Select
More. (up to 2 times).
b) Select
Service Access Control.
c) Select
Network Authenticated Access.
d) Select
Guest Access and Guest Passcode.
e) Select Next.
f) Select Save.
g) Select
Exit Tools.
3.
Print a Configuration Sheet and verify the settings against the
information that was entered.